|Deletions are marked like this.||Additions are marked like this.|
|Line 1:||Line 1:|
== Windows VM Install & Setup ==
Download and install the VirtualBox application for Windows from [[https://www.virtualbox.org/wiki/Downloads|VirtualBox]]
Download and install an unzip program for '''7 zip''' files '''(.7z)''' from the windows app store if you do not already have one. The '''Winzip Universal''' application is one that will work.
Download the virtual disk image of the VM '''Ubuntu_710_clone_2.7z''' [[https://drive.google.com/file/d/1bPvF9m2z4yRDIOv51B5bihU1VN_o2J5x/view?usp=sharing|image]]. Please note the compressed size of this file is ~30G and the uncompressed file size will be ~60G. The assumption below is there is enough free disk space in your Downloads folder to accommodate the ~30G compressed file.
Open the disk image file with the WinZip application.
''Please substitute '''Ubuntu_710_clone_2.7z''' in the screenshots below as the screenshots were taken with an earlier version and name for the disk image file''
For this application you select the Unzip tab and check the box next to the name of the image to unzip it.
Then you save the uncompressed disk image file '''Ubuntu_710_clone-disk1.vdi''' to some location, i.e., where you have ~60G free space.
Note that in the screenshots below '''the uncompressed disk image file was saved to a new folder "VirtualBox VMs" in the users home directory'''.
Open the VirtualBox application and select '''Machine -> New''' from the pulldown menu.
''Please substitute '''Ubuntu_710_clone-disk1.vdi''' for the disk image in the screenshots below as the screenshots were taken with an earlier version and name for the disk image file''
Fill in the parameters to name this new machine. Here it is named '''Ubuntu_FS_600_700b1_TutorialData''' but you should name it to reflect the current disk image name, e.g., '''Ubuntu_FS_710'''.
The path to the folder under the users home directory with the disk image, VitrualBox VMs, is specified here as the destination to also save files related to running it.
Then click the '''Next''' button to continue and allocate memory to the VM.
While the VM can run with small amounts of RAM, speed and performance will increase with larger amounts of RAM. However, even if you have more than 16G of RAM on your host machine with more than 8G free to allocate to the VM, the recommendation is to '''start with no more than 8G allocated''' to the VM. This is because on some hosts, the VM may fail to initially boot when allocated more than 8G of RAM. If you do not have 8G of RAM free, then you can try running it with smaller amounts.
Click the '''Next''' button after allocating memory.
Select the VM will use an exiting disk image file and click on the folder icon to navigate to the subdirectory with the file '''FStutorial_clone_2.vdi'''
You should see something like this when navigating to the file,
Select "open" after locating the file.
VirtualBox will then show you info about the disk image, noting that this "storage device" is not yet attached to the VM for use.
Select "choose" to attach the disk image file to the VM. VirtualBox will then bring you back to the previous menu where you selected to use an existing virtual hard disk - showing the info for the now attached disk image file.
Note that the size listed for the disk image is not listed as 60GB but 107GB. Since this is a dynamic (not fixed size) VM, this means the maximum size the VM (disk image file on the host system) can grow to is 107GB. Or, since the image is initially 60GB, then 107 - 60 = '''40GB of empty storage are initially available inside the virtual machine''' to use for work, data, further installation of packages, etc.
Click on the "Create" button to create the VM.
You should now see an entry for the named VM ("Ubuntu_FS_600_700b1_TutorialData" in the example above) in the top level VirtualBox menu. You should be able to click on the entry and see the information for how the VM is currently configured.
Many of the default settings used by VirtualBox are OK as is, but some changes need to be made for the VM to run (while others will improve the environment).
If you click on the "Settings" wheel icon at the top of the menu, additional settings by category can be viewed and changed.
Under '''General -> Advanced''' you can '''change the clipboard settings to bidirectional''' so you can cut and paste text between the windows host and the guest VM.
The description can be left blank.
Disk encryption can be left turned off.
Switching to the '''System''' tab, change the settings under the '''Motherboard''' tab to specify that a mouse is in use. Verify the other settings, e.g., 8 GB of RAM allocated.
Then select OK.
Now switch to the '''Processor''' tab.
Current multi-core Intel i7 and i9 chips afford the use of 4, 6, 8, 12 or 16 cores in consumer desktop machines including 16 cores in high end laptops. Please check the '''system CPU information reported by the OS''' on your machine to determine '''total number of available cores = physical cores + virtual cores''' (with virtual cores enabled by having hyper-threading turned on).
You can start with assigning 1/2 of all available cores to the guest VM assuming the host machine is not doing anything so computationally intensive that it in turn can make due with 1/2 the available cores. With an equitable split of CPU resources you can then allow the VM to utilize 100% of its "execution cap".
In the example below, a machine using an i7 chip with 4 total available cores assigns the full use of 2 cores to the VM (leaving 2 cores for the host machine).
The acceleration settings can be left as is.
Switching now to the '''Display''' tab, the video memory can be increased to the maximum, the monitor count left at 1, and the graphics controller set to VMSVGA.
The remote display settings can be left as is.
The video recording settings can be left turned off (as is).
Switching to the '''Storage''' tab, you can verify the information for the attached disk image, e.g., the starting size of the image is smaller than the maximum dynamic size.
Switching to the '''Audio''' tab, all settings can be left as is.
Switching to the '''Network''' tab, the setting can be left to NAT for the network connection on adapter 1. All the other adapter settings can be left as is.
Switching to the '''Serial Ports''' tab, all settings can be left as is.
Switching to the '''USB''' tab, the settings can left as is (enabling USB).
Switching to the '''Shared Folders''' tab, the settings can left as is.
Switching to the '''User Interface''' tab, the settings can left as is.
Now return to the main menu and check some of the settings changes made above.
If you switch from the '''Details''' to the '''Snapshot''' view, the VM should report it is in its "current" or initial state with no snapshots.
Now from either the '''Details''' or '''Snapshot''' window, start the VM by pressing on the green start button.
You should see the Ubuntu splash screen while the VM boots. You can click on the X's to close the notifications about "auto capture keyboard" and the "mouse integration".
The empty Ubuntu desktop should appear if the boot is successful. You can right click in the desktop window to bring up a terminal.
This should bring up a terminal with the environment already set to use the 6.0.0 Freesurfer release.
The VM window size can be adjusted to be larger directly thru the VirtualBox client.
The virtual machine can be turned off (shut down) by right clicking on the entry for the VM in the VirtualBox window.
VirtualBox will then prompt you with various choices: (1) save the machine state; (2) send the ACPI shutdown signal; (3) power off of the machine in its current state. Since we have not made any snapshots of the machine state, and have not changed the state of the machine in an appreciable way, then select power off.
This VM contains both the freesurfer 6.0.0 release, the 7.0.0 beta 1 release, and a copy of the tutorial data used in the freesurfer courses from 2019. Please '''see the README* files''' for more details in the home directory for the userid login as "developer". However, it does not contain a '''license.txt''' file needed to run some commands.
You can put an existing freesurfer license.txt file in the home directory for uid developer. For example, you could copy a license file from another machine into the VM using the network/Firefox browser in the VM. If you have never gotten a license.txt file, you can open the FireFox browser in the VM and navigate to the URL to get a freesurfer license. (See https://surfer.nmr.mgh.harvard.edu/registration.html).
Once there is a license file as ~/developer/license.txt in the VM, then it would be a good time to save the state of the machine as a snapshot. Switch to the snapshot view of the VM in the VirtualBox application window and click on the "take" button.
You will be prompted to name the snapshot and add an (optional) description.
Now in the snapshot view, the current state of the machine is described by this first snapshot.
If you subsequently create another snapshot based upon this first snapshot, it will appear indented in the list via an arrow indicator since the new snapshot was derived from a previously existing snapshot.
Once snapshots are present, VirtualBox will also give you the choice to revert to the previous snapshot when shutting down the machine. Reverting to the previous snapshot will discard any changed made to the machine in the current session since booing up from the previous snapshot.
''NOTE: VirtualBox creates a "delta" disk image file against a previous disk image file in order to capture a snapshot. Or in the example above, the virtual disk image file the VM was created from is unchanged after the first snapshot is made. Hence creating snapshots will consume more disk space on the host system. Flattening and merging the snapshots, cloning the VM and then shrinking the size of the new (single) disk image file is beyond the scope of examples listed here.''
Now that we know the VM booted successfully using 8G RAM and 2 out of the 4 processors, we could go back and test increasing those resources in order to improve the VM performance.
On a machine with 24G of RAM, we could try increasing the limit to 16G of RAM (4G more than 1/2 total RAM).
On a machine with 8 total available cores, we could up the resources to 4 cores (1/2 the cores).
|This page is obsolete as of 01/18/2022.|
This page is obsolete as of 01/18/2022.