'\" '\" Copyright (c) 1993 The Regents of the University of California. '\" Copyright (c) 1994-1997 Sun Microsystems, Inc. '\" Copyright (c) 1993-1997 Bell Labs Innovations for Lucent Technologies '\" Copyright (c) 1998-2000 Ajuba Solutions '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" RCS: @(#) $Id: info.n,v 1.1.1.1 2007/07/10 15:04:23 duncan Exp $ '\" '\" The definitions below are for supplemental macros used in Tcl/Tk '\" manual entries. '\" '\" .AP type name in/out ?indent? '\" Start paragraph describing an argument to a library procedure. '\" type is type of argument (int, etc.), in/out is either "in", "out", '\" or "in/out" to describe whether procedure reads or modifies arg, '\" and indent is equivalent to second arg of .IP (shouldn't ever be '\" needed; use .AS below instead) '\" '\" .AS ?type? ?name? '\" Give maximum sizes of arguments for setting tab stops. Type and '\" name are examples of largest possible arguments that will be passed '\" to .AP later. If args are omitted, default tab stops are used. '\" '\" .BS '\" Start box enclosure. From here until next .BE, everything will be '\" enclosed in one large box. '\" '\" .BE '\" End of box enclosure. '\" '\" .CS '\" Begin code excerpt. '\" '\" .CE '\" End code excerpt. '\" '\" .VS ?version? ?br? '\" Begin vertical sidebar, for use in marking newly-changed parts '\" of man pages. The first argument is ignored and used for recording '\" the version when the .VS was added, so that the sidebars can be '\" found and removed when they reach a certain age. If another argument '\" is present, then a line break is forced before starting the sidebar. '\" '\" .VE '\" End of vertical sidebar. '\" '\" .DS '\" Begin an indented unfilled display. '\" '\" .DE '\" End of indented unfilled display. '\" '\" .SO '\" Start of list of standard options for a Tk widget. The '\" options follow on successive lines, in four columns separated '\" by tabs. '\" '\" .SE '\" End of list of standard options for a Tk widget. '\" '\" .OP cmdName dbName dbClass '\" Start of description of a specific option. cmdName gives the '\" option's name as specified in the class command, dbName gives '\" the option's name in the option database, and dbClass gives '\" the option's class in the option database. '\" '\" .UL arg1 arg2 '\" Print arg1 underlined, then print arg2 normally. '\" '\" RCS: @(#) $Id: man.macros,v 1.1.1.1 2007/07/10 15:04:23 duncan Exp $ '\" '\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. .if t .wh -1.3i ^B .nr ^l \n(.l .ad b '\" # Start an argument description .de AP .ie !"\\$4"" .TP \\$4 .el \{\ . ie !"\\$2"" .TP \\n()Cu . el .TP 15 .\} .ta \\n()Au \\n()Bu .ie !"\\$3"" \{\ \&\\$1 \\fI\\$2\\fP (\\$3) .\".b .\} .el \{\ .br .ie !"\\$2"" \{\ \&\\$1 \\fI\\$2\\fP .\} .el \{\ \&\\fI\\$1\\fP .\} .\} .. '\" # define tabbing values for .AP .de AS .nr )A 10n .if !"\\$1"" .nr )A \\w'\\$1'u+3n .nr )B \\n()Au+15n .\" .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n .nr )C \\n()Bu+\\w'(in/out)'u+2n .. .AS Tcl_Interp Tcl_CreateInterp in/out '\" # BS - start boxed text '\" # ^y = starting y location '\" # ^b = 1 .de BS .br .mk ^y .nr ^b 1u .if n .nf .if n .ti 0 .if n \l'\\n(.lu\(ul' .if n .fi .. '\" # BE - end boxed text (draw box now) .de BE .nf .ti 0 .mk ^t .ie n \l'\\n(^lu\(ul' .el \{\ .\" Draw four-sided box normally, but don't draw top of .\" box if the box started on an earlier page. .ie !\\n(^b-1 \{\ \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .el \}\ \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .\} .fi .br .nr ^b 0 .. '\" # VS - start vertical sidebar '\" # ^Y = starting y location '\" # ^v = 1 (for troff; for nroff this doesn't matter) .de VS .if !"\\$2"" .br .mk ^Y .ie n 'mc \s12\(br\s0 .el .nr ^v 1u .. '\" # VE - end of vertical sidebar .de VE .ie n 'mc .el \{\ .ev 2 .nf .ti 0 .mk ^t \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' .sp -1 .fi .ev .\} .nr ^v 0 .. '\" # Special macro to handle page bottom: finish off current '\" # box/sidebar if in box/sidebar mode, then invoked standard '\" # page bottom macro. .de ^B .ev 2 'ti 0 'nf .mk ^t .if \\n(^b \{\ .\" Draw three-sided box if this is the box's first page, .\" draw two sides but no top otherwise. .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .\} .if \\n(^v \{\ .nr ^x \\n(^tu+1v-\\n(^Yu \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c .\} .bp 'fi .ev .if \\n(^b \{\ .mk ^y .nr ^b 2 .\} .if \\n(^v \{\ .mk ^Y .\} .. '\" # DS - begin display .de DS .RS .nf .sp .. '\" # DE - end display .de DE .fi .RE .sp .. '\" # SO - start of list of standard options .de SO .SH "STANDARD OPTIONS" .LP .nf .ta 5.5c 11c .ft B .. '\" # SE - end of list of standard options .de SE .fi .ft R .LP See the \\fBoptions\\fR manual entry for details on the standard options. .. '\" # OP - start of full description for a single option .de OP .LP .nf .ta 4c Command-Line Name: \\fB\\$1\\fR Database Name: \\fB\\$2\\fR Database Class: \\fB\\$3\\fR .fi .IP .. '\" # CS - begin code excerpt .de CS .RS .nf .ta .25i .5i .75i 1i .. '\" # CE - end code excerpt .de CE .fi .RE .. .de UL \\$1\l'|0\(ul'\\$2 .. .TH info n 8.4 Tcl "Tcl Built-In Commands" .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME info \- Return information about the state of the Tcl interpreter .SH SYNOPSIS \fBinfo \fIoption \fR?\fIarg arg ...\fR? .BE .SH DESCRIPTION .PP This command provides information about various internals of the Tcl interpreter. The legal \fIoption\fR's (which may be abbreviated) are: .TP \fBinfo args \fIprocname\fR Returns a list containing the names of the arguments to procedure \fIprocname\fR, in order. \fIProcname\fR must be the name of a Tcl command procedure. .TP \fBinfo body \fIprocname\fR Returns the body of procedure \fIprocname\fR. \fIProcname\fR must be the name of a Tcl command procedure. .TP \fBinfo cmdcount\fR Returns a count of the total number of commands that have been invoked in this interpreter. .TP \fBinfo commands \fR?\fIpattern\fR? If \fIpattern\fR isn't specified, returns a list of names of all the Tcl commands in the current namespace, including both the built-in commands written in C and the command procedures defined using the \fBproc\fR command. If \fIpattern\fR is specified, only those names matching \fIpattern\fR are returned. Matching is determined using the same rules as for \fBstring match\fR. \fIpattern\fR can be a qualified name like \fBFoo::print*\fR. That is, it may specify a particular namespace using a sequence of namespace names separated by double colons (\fB::\fR), and may have pattern matching special characters at the end to specify a set of commands in that namespace. If \fIpattern\fR is a qualified name, the resulting list of command names has each one qualified with the name of the specified namespace. .TP \fBinfo complete \fIcommand\fR Returns 1 if \fIcommand\fR is a complete Tcl command in the sense of having no unclosed quotes, braces, brackets or array element names. If the command doesn't appear to be complete then 0 is returned. This command is typically used in line-oriented input environments to allow users to type in commands that span multiple lines; if the command isn't complete, the script can delay evaluating it until additional lines have been typed to complete the command. .TP \fBinfo default \fIprocname arg varname\fR \fIProcname\fR must be the name of a Tcl command procedure and \fIarg\fR must be the name of an argument to that procedure. If \fIarg\fR doesn't have a default value then the command returns \fB0\fR. Otherwise it returns \fB1\fR and places the default value of \fIarg\fR into variable \fIvarname\fR. .TP \fBinfo exists \fIvarName\fR Returns \fB1\fR if the variable named \fIvarName\fR exists in the current context (either as a global or local variable) and has been defined by being given a value, returns \fB0\fR otherwise. .VS 8.4 .TP \fBinfo functions \fR?\fIpattern\fR? If \fIpattern\fR isn't specified, returns a list of all the math functions currently defined. If \fIpattern\fR is specified, only those functions whose name matches \fIpattern\fR are returned. Matching is determined using the same rules as for \fBstring match\fR. .VE .TP \fBinfo globals \fR?\fIpattern\fR? If \fIpattern\fR isn't specified, returns a list of all the names of currently-defined global variables. Global variables are variables in the global namespace. If \fIpattern\fR is specified, only those names matching \fIpattern\fR are returned. Matching is determined using the same rules as for \fBstring match\fR. .TP \fBinfo hostname\fR Returns the name of the computer on which this invocation is being executed. .VS Note that this name is not guaranteed to be the fully qualified domain name of the host. Where machines have several different names (as is common on systems with both TCP/IP (DNS) and NetBIOS-based networking installed,) it is the name that is suitable for TCP/IP networking that is returned. .VE .TP \fBinfo level\fR ?\fInumber\fR? If \fInumber\fR is not specified, this command returns a number giving the stack level of the invoking procedure, or 0 if the command is invoked at top-level. If \fInumber\fR is specified, then the result is a list consisting of the name and arguments for the procedure call at level \fInumber\fR on the stack. If \fInumber\fR is positive then it selects a particular stack level (1 refers to the top-most active procedure, 2 to the procedure it called, and so on); otherwise it gives a level relative to the current level (0 refers to the current procedure, -1 to its caller, and so on). See the \fBuplevel\fR command for more information on what stack levels mean. .TP \fBinfo library\fR Returns the name of the library directory in which standard Tcl scripts are stored. This is actually the value of the \fBtcl_library\fR variable and may be changed by setting \fBtcl_library\fR. See the \fBtclvars\fR manual entry for more information. .TP \fBinfo loaded \fR?\fIinterp\fR? Returns a list describing all of the packages that have been loaded into \fIinterp\fR with the \fBload\fR command. Each list element is a sub-list with two elements consisting of the name of the file from which the package was loaded and the name of the package. For statically-loaded packages the file name will be an empty string. If \fIinterp\fR is omitted then information is returned for all packages loaded in any interpreter in the process. To get a list of just the packages in the current interpreter, specify an empty string for the \fIinterp\fR argument. .TP \fBinfo locals \fR?\fIpattern\fR? If \fIpattern\fR isn't specified, returns a list of all the names of currently-defined local variables, including arguments to the current procedure, if any. Variables defined with the \fBglobal\fR, \fBupvar\fR and \fBvariable\fR commands will not be returned. If \fIpattern\fR is specified, only those names matching \fIpattern\fR are returned. Matching is determined using the same rules as for \fBstring match\fR. .TP \fBinfo nameofexecutable\fR Returns the full path name of the binary file from which the application was invoked. If Tcl was unable to identify the file, then an empty string is returned. .TP \fBinfo patchlevel\fR Returns the value of the global variable \fBtcl_patchLevel\fR; see the \fBtclvars\fR manual entry for more information. .TP \fBinfo procs \fR?\fIpattern\fR? If \fIpattern\fR isn't specified, returns a list of all the names of Tcl command procedures in the current namespace. If \fIpattern\fR is specified, only those procedure names in the current namespace matching \fIpattern\fR are returned. Matching is determined using the same rules as for \fBstring match\fR. If \fIpattern\fR contains any namespace separators, they are used to select a namespace relative to the current namespace (or relative to the global namespace if \fIpattern\fR starts with \fB::\fR) to match within; the matching pattern is taken to be the part after the last namespace separator. .TP \fBinfo script\fR ?\fIfilename\fR? If a Tcl script file is currently being evaluated (i.e. there is a call to \fBTcl_EvalFile\fR active or there is an active invocation of the \fBsource\fR command), then this command returns the name of the innermost file being processed. If \fIfilename\fR is specified, then the return value of this command will be modified for the duration of the active invocation to return that name. This is useful in virtual file system applications. Otherwise the command returns an empty string. .TP \fBinfo sharedlibextension\fR Returns the extension used on this platform for the names of files containing shared libraries (for example, \fB.so\fR under Solaris). If shared libraries aren't supported on this platform then an empty string is returned. .TP \fBinfo tclversion\fR Returns the value of the global variable \fBtcl_version\fR; see the \fBtclvars\fR manual entry for more information. .TP \fBinfo vars\fR ?\fIpattern\fR? If \fIpattern\fR isn't specified, returns a list of all the names of currently-visible variables. This includes locals and currently-visible globals. If \fIpattern\fR is specified, only those names matching \fIpattern\fR are returned. Matching is determined using the same rules as for \fBstring match\fR. \fIpattern\fR can be a qualified name like \fBFoo::option*\fR. That is, it may specify a particular namespace using a sequence of namespace names separated by double colons (\fB::\fR), and may have pattern matching special characters at the end to specify a set of variables in that namespace. If \fIpattern\fR is a qualified name, the resulting list of variable names has each matching namespace variable qualified with the name of its namespace. Note that a currently-visible variable may not yet "exist" if it has not been set (e.g. a variable declared but not set by \fBvariable\fR). .SH EXAMPLE This command prints out a procedure suitable for saving in a Tcl script: .CS proc printProc {procName} { set result [list proc $procName] set formals {} foreach var [\fBinfo args\fR $procName] { if {[\fBinfo default\fR $procName $var def]} { lappend formals [list $var $def] } else { # Still need the list-quoting because variable # names may properly contain spaces. lappend formals [list $var] } } puts [lappend result $formals [\fBinfo body\fR $procName]] } .CE .SH "SEE ALSO" global(n), proc(n) .SH KEYWORDS command, information, interpreter, level, namespace, procedure, variable '\" Local Variables: '\" mode: nroff '\" End: