'\" '\" Copyright (c) 1993-1997 Bell Labs Innovations for Lucent Technologies '\" Copyright (c) 1997 Sun Microsystems, Inc. '\" Copyright (c) 2000 Scriptics Corporation. '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" RCS: @(#) $Id: namespace.n,v 1.1.1.1 2007/07/10 15:04:23 duncan Exp $ '\" '\" The definitions below are for supplemental macros used in Tcl/Tk '\" manual entries. '\" '\" .AP type name in/out ?indent? '\" Start paragraph describing an argument to a library procedure. '\" type is type of argument (int, etc.), in/out is either "in", "out", '\" or "in/out" to describe whether procedure reads or modifies arg, '\" and indent is equivalent to second arg of .IP (shouldn't ever be '\" needed; use .AS below instead) '\" '\" .AS ?type? ?name? '\" Give maximum sizes of arguments for setting tab stops. Type and '\" name are examples of largest possible arguments that will be passed '\" to .AP later. If args are omitted, default tab stops are used. '\" '\" .BS '\" Start box enclosure. From here until next .BE, everything will be '\" enclosed in one large box. '\" '\" .BE '\" End of box enclosure. '\" '\" .CS '\" Begin code excerpt. '\" '\" .CE '\" End code excerpt. '\" '\" .VS ?version? ?br? '\" Begin vertical sidebar, for use in marking newly-changed parts '\" of man pages. The first argument is ignored and used for recording '\" the version when the .VS was added, so that the sidebars can be '\" found and removed when they reach a certain age. If another argument '\" is present, then a line break is forced before starting the sidebar. '\" '\" .VE '\" End of vertical sidebar. '\" '\" .DS '\" Begin an indented unfilled display. '\" '\" .DE '\" End of indented unfilled display. '\" '\" .SO '\" Start of list of standard options for a Tk widget. The '\" options follow on successive lines, in four columns separated '\" by tabs. '\" '\" .SE '\" End of list of standard options for a Tk widget. '\" '\" .OP cmdName dbName dbClass '\" Start of description of a specific option. cmdName gives the '\" option's name as specified in the class command, dbName gives '\" the option's name in the option database, and dbClass gives '\" the option's class in the option database. '\" '\" .UL arg1 arg2 '\" Print arg1 underlined, then print arg2 normally. '\" '\" RCS: @(#) $Id: man.macros,v 1.1.1.1 2007/07/10 15:04:23 duncan Exp $ '\" '\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. .if t .wh -1.3i ^B .nr ^l \n(.l .ad b '\" # Start an argument description .de AP .ie !"\\$4"" .TP \\$4 .el \{\ . ie !"\\$2"" .TP \\n()Cu . el .TP 15 .\} .ta \\n()Au \\n()Bu .ie !"\\$3"" \{\ \&\\$1 \\fI\\$2\\fP (\\$3) .\".b .\} .el \{\ .br .ie !"\\$2"" \{\ \&\\$1 \\fI\\$2\\fP .\} .el \{\ \&\\fI\\$1\\fP .\} .\} .. '\" # define tabbing values for .AP .de AS .nr )A 10n .if !"\\$1"" .nr )A \\w'\\$1'u+3n .nr )B \\n()Au+15n .\" .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n .nr )C \\n()Bu+\\w'(in/out)'u+2n .. .AS Tcl_Interp Tcl_CreateInterp in/out '\" # BS - start boxed text '\" # ^y = starting y location '\" # ^b = 1 .de BS .br .mk ^y .nr ^b 1u .if n .nf .if n .ti 0 .if n \l'\\n(.lu\(ul' .if n .fi .. '\" # BE - end boxed text (draw box now) .de BE .nf .ti 0 .mk ^t .ie n \l'\\n(^lu\(ul' .el \{\ .\" Draw four-sided box normally, but don't draw top of .\" box if the box started on an earlier page. .ie !\\n(^b-1 \{\ \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .el \}\ \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .\} .fi .br .nr ^b 0 .. '\" # VS - start vertical sidebar '\" # ^Y = starting y location '\" # ^v = 1 (for troff; for nroff this doesn't matter) .de VS .if !"\\$2"" .br .mk ^Y .ie n 'mc \s12\(br\s0 .el .nr ^v 1u .. '\" # VE - end of vertical sidebar .de VE .ie n 'mc .el \{\ .ev 2 .nf .ti 0 .mk ^t \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' .sp -1 .fi .ev .\} .nr ^v 0 .. '\" # Special macro to handle page bottom: finish off current '\" # box/sidebar if in box/sidebar mode, then invoked standard '\" # page bottom macro. .de ^B .ev 2 'ti 0 'nf .mk ^t .if \\n(^b \{\ .\" Draw three-sided box if this is the box's first page, .\" draw two sides but no top otherwise. .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .\} .if \\n(^v \{\ .nr ^x \\n(^tu+1v-\\n(^Yu \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c .\} .bp 'fi .ev .if \\n(^b \{\ .mk ^y .nr ^b 2 .\} .if \\n(^v \{\ .mk ^Y .\} .. '\" # DS - begin display .de DS .RS .nf .sp .. '\" # DE - end display .de DE .fi .RE .sp .. '\" # SO - start of list of standard options .de SO .SH "STANDARD OPTIONS" .LP .nf .ta 5.5c 11c .ft B .. '\" # SE - end of list of standard options .de SE .fi .ft R .LP See the \\fBoptions\\fR manual entry for details on the standard options. .. '\" # OP - start of full description for a single option .de OP .LP .nf .ta 4c Command-Line Name: \\fB\\$1\\fR Database Name: \\fB\\$2\\fR Database Class: \\fB\\$3\\fR .fi .IP .. '\" # CS - begin code excerpt .de CS .RS .nf .ta .25i .5i .75i 1i .. '\" # CE - end code excerpt .de CE .fi .RE .. .de UL \\$1\l'|0\(ul'\\$2 .. .TH namespace n 8.0 Tcl "Tcl Built-In Commands" .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME namespace \- create and manipulate contexts for commands and variables .SH SYNOPSIS \fBnamespace \fR?\fIoption\fR? ?\fIarg ...\fR? .BE .SH DESCRIPTION .PP The \fBnamespace\fR command lets you create, access, and destroy separate contexts for commands and variables. See the section \fBWHAT IS A NAMESPACE?\fR below for a brief overview of namespaces. The legal values of \fIoption\fR are listed below. Note that you can abbreviate the \fIoption\fRs. .TP \fBnamespace children \fR?\fInamespace\fR? ?\fIpattern\fR? Returns a list of all child namespaces that belong to the namespace \fInamespace\fR. If \fInamespace\fR is not specified, then the children are returned for the current namespace. This command returns fully-qualified names, which start with a double colon (\fB::\fR). If the optional \fIpattern\fR is given, then this command returns only the names that match the glob-style pattern. The actual pattern used is determined as follows: a pattern that starts with double colon (\fB::\fR) is used directly, otherwise the namespace \fInamespace\fR (or the fully-qualified name of the current namespace) is prepended onto the pattern. .TP \fBnamespace code \fIscript\fR Captures the current namespace context for later execution of the script \fIscript\fR. It returns a new script in which \fIscript\fR has been wrapped in a \fBnamespace inscope\fR command. The new script has two important properties. First, it can be evaluated in any namespace and will cause \fIscript\fR to be evaluated in the current namespace (the one where the \fBnamespace code\fR command was invoked). Second, additional arguments can be appended to the resulting script and they will be passed to \fIscript\fR as additional arguments. For example, suppose the command \fBset script [namespace code {foo bar}]\fR is invoked in namespace \fB::a::b\fR. Then \fBeval "$script x y"\fR can be executed in any namespace (assuming the value of \fBscript\fR has been passed in properly) and will have the same effect as the command \fB::namespace eval ::a::b {foo bar x y}\fR. This command is needed because extensions like Tk normally execute callback scripts in the global namespace. A scoped command captures a command together with its namespace context in a way that allows it to be executed properly later. See the section \fBSCOPED SCRIPTS\fR for some examples of how this is used to create callback scripts. .TP \fBnamespace current\fR Returns the fully-qualified name for the current namespace. The actual name of the global namespace is ``'' (i.e., an empty string), but this command returns \fB::\fR for the global namespace as a convenience to programmers. .TP \fBnamespace delete \fR?\fInamespace namespace ...\fR? Each namespace \fInamespace\fR is deleted and all variables, procedures, and child namespaces contained in the namespace are deleted. If a procedure is currently executing inside the namespace, the namespace will be kept alive until the procedure returns; however, the namespace is marked to prevent other code from looking it up by name. If a namespace doesn't exist, this command returns an error. If no namespace names are given, this command does nothing. .TP \fBnamespace eval\fR \fInamespace arg\fR ?\fIarg ...\fR? Activates a namespace called \fInamespace\fR and evaluates some code in that context. If the namespace does not already exist, it is created. If more than one \fIarg\fR argument is specified, the arguments are concatenated together with a space between each one in the same fashion as the \fBeval\fR command, and the result is evaluated. .br .sp If \fInamespace\fR has leading namespace qualifiers and any leading namespaces do not exist, they are automatically created. .TP \fBnamespace exists\fR \fInamespace\fR Returns \fB1\fR if \fInamespace\fR is a valid namespace in the current context, returns \fB0\fR otherwise. .TP \fBnamespace export \fR?\-\fBclear\fR? ?\fIpattern pattern ...\fR? Specifies which commands are exported from a namespace. The exported commands are those that can be later imported into another namespace using a \fBnamespace import\fR command. Both commands defined in a namespace and commands the namespace has previously imported can be exported by a namespace. The commands do not have to be defined at the time the \fBnamespace export\fR command is executed. Each \fIpattern\fR may contain glob-style special characters, but it may not include any namespace qualifiers. That is, the pattern can only specify commands in the current (exporting) namespace. Each \fIpattern\fR is appended onto the namespace's list of export patterns. If the \-\fBclear\fR flag is given, the namespace's export pattern list is reset to empty before any \fIpattern\fR arguments are appended. If no \fIpattern\fRs are given and the \-\fBclear\fR flag isn't given, this command returns the namespace's current export list. .TP \fBnamespace forget \fR?\fIpattern pattern ...\fR? Removes previously imported commands from a namespace. Each \fIpattern\fR is a simple or qualified name such as \fBx\fR, \fBfoo::x\fR or \fBa::b::p*\fR. Qualified names contain double colons (\fB::\fR) and qualify a name with the name of one or more namespaces. Each \fIqualified pattern\fR is qualified with the name of an exporting namespace and may have glob-style special characters in the command name at the end of the qualified name. Glob characters may not appear in a namespace name. For each \fIsimple pattern\fR this command deletes the matching commands of the current namespace that were imported from a different namespace. For \fIqualified patterns\fR, this command first finds the matching exported commands. It then checks whether any of those commands were previously imported by the current namespace. If so, this command deletes the corresponding imported commands. In effect, this un-does the action of a \fBnamespace import\fR command. .TP \fBnamespace import \fR?\fB\-force\fR? ?\fIpattern\fR \fIpattern ...\fR? Imports commands into a namespace. Each \fIpattern\fR is a qualified name like \fBfoo::x\fR or \fBa::p*\fR. That is, it includes the name of an exporting namespace and may have glob-style special characters in the command name at the end of the qualified name. Glob characters may not appear in a namespace name. All the commands that match a \fIpattern\fR string and which are currently exported from their namespace are added to the current namespace. This is done by creating a new command in the current namespace that points to the exported command in its original namespace; when the new imported command is called, it invokes the exported command. This command normally returns an error if an imported command conflicts with an existing command. However, if the \-\fBforce\fR option is given, imported commands will silently replace existing commands. The \fBnamespace import\fR command has snapshot semantics: that is, only requested commands that are currently defined in the exporting namespace are imported. In other words, you can import only the commands that are in a namespace at the time when the \fBnamespace import\fR command is executed. If another command is defined and exported in this namespace later on, it will not be imported. .TP \fBnamespace inscope\fR \fInamespace\fR \fIscript\fR ?\fIarg ...\fR? Executes a script in the context of the specified \fInamespace\fR. This command is not expected to be used directly by programmers; calls to it are generated implicitly when applications use \fBnamespace code\fR commands to create callback scripts that the applications then register with, e.g., Tk widgets. The \fBnamespace inscope\fR command is much like the \fBnamespace eval\fR command except that the \fInamespace\fR must already exist, and \fBnamespace inscope\fR appends additional \fIarg\fRs as proper list elements. .br \fBnamespace inscope ::foo $script $x $y $z\fR is equivalent to \fBnamespace eval ::foo [concat $script [list $x $y $z]]\fR thus additional arguments will not undergo a second round of substitution, as is the case with \fBnamespace eval\fR. .TP \fBnamespace origin \fIcommand\fR Returns the fully-qualified name of the original command to which the imported command \fIcommand\fR refers. When a command is imported into a namespace, a new command is created in that namespace that points to the actual command in the exporting namespace. If a command is imported into a sequence of namespaces \fIa, b,...,n\fR where each successive namespace just imports the command from the previous namespace, this command returns the fully-qualified name of the original command in the first namespace, \fIa\fR. If \fIcommand\fR does not refer to an imported command, the command's own fully-qualified name is returned. .TP \fBnamespace parent\fR ?\fInamespace\fR? Returns the fully-qualified name of the parent namespace for namespace \fInamespace\fR. If \fInamespace\fR is not specified, the fully-qualified name of the current namespace's parent is returned. .TP \fBnamespace qualifiers\fR \fIstring\fR Returns any leading namespace qualifiers for \fIstring\fR. Qualifiers are namespace names separated by double colons (\fB::\fR). For the \fIstring\fR \fB::foo::bar::x\fR, this command returns \fB::foo::bar\fR, and for \fB::\fR it returns an empty string. This command is the complement of the \fBnamespace tail\fR command. Note that it does not check whether the namespace names are, in fact, the names of currently defined namespaces. .TP \fBnamespace tail\fR \fIstring\fR Returns the simple name at the end of a qualified string. Qualifiers are namespace names separated by double colons (\fB::\fR). For the \fIstring\fR \fB::foo::bar::x\fR, this command returns \fBx\fR, and for \fB::\fR it returns an empty string. This command is the complement of the \fBnamespace qualifiers\fR command. It does not check whether the namespace names are, in fact, the names of currently defined namespaces. .TP \fBnamespace which\fR ?\-\fBcommand\fR? ?\-\fBvariable\fR? \fIname\fR Looks up \fIname\fR as either a command or variable and returns its fully-qualified name. For example, if \fIname\fR does not exist in the current namespace but does exist in the global namespace, this command returns a fully-qualified name in the global namespace. If the command or variable does not exist, this command returns an empty string. If the variable has been created but not defined, such as with the \fBvariable\fR command or through a \fBtrace\fR on the variable, this command will return the fully-qualified name of the variable. If no flag is given, \fIname\fR is treated as a command name. See the section \fBNAME RESOLUTION\fR below for an explanation of the rules regarding name resolution. .SH "WHAT IS A NAMESPACE?" .PP A namespace is a collection of commands and variables. It encapsulates the commands and variables to ensure that they won't interfere with the commands and variables of other namespaces. Tcl has always had one such collection, which we refer to as the \fIglobal namespace\fR. The global namespace holds all global variables and commands. The \fBnamespace eval\fR command lets you create new namespaces. For example, .CS \fBnamespace eval\fR Counter { \fBnamespace export\fR bump variable num 0 proc bump {} { variable num incr num } } .CE creates a new namespace containing the variable \fBnum\fR and the procedure \fBbump\fR. The commands and variables in this namespace are separate from other commands and variables in the same program. If there is a command named \fBbump\fR in the global namespace, for example, it will be different from the command \fBbump\fR in the \fBCounter\fR namespace. .PP Namespace variables resemble global variables in Tcl. They exist outside of the procedures in a namespace but can be accessed in a procedure via the \fBvariable\fR command, as shown in the example above. .PP Namespaces are dynamic. You can add and delete commands and variables at any time, so you can build up the contents of a namespace over time using a series of \fBnamespace eval\fR commands. For example, the following series of commands has the same effect as the namespace definition shown above: .CS \fBnamespace eval\fR Counter { variable num 0 proc bump {} { variable num return [incr num] } } \fBnamespace eval\fR Counter { proc test {args} { return $args } } \fBnamespace eval\fR Counter { rename test "" } .CE Note that the \fBtest\fR procedure is added to the \fBCounter\fR namespace, and later removed via the \fBrename\fR command. .PP Namespaces can have other namespaces within them, so they nest hierarchically. A nested namespace is encapsulated inside its parent namespace and can not interfere with other namespaces. .SH "QUALIFIED NAMES" .PP Each namespace has a textual name such as \fBhistory\fR or \fB::safe::interp\fR. Since namespaces may nest, qualified names are used to refer to commands, variables, and child namespaces contained inside namespaces. Qualified names are similar to the hierarchical path names for Unix files or Tk widgets, except that \fB::\fR is used as the separator instead of \fB/\fR or \fB.\fR. The topmost or global namespace has the name ``'' (i.e., an empty string), although \fB::\fR is a synonym. As an example, the name \fB::safe::interp::create\fR refers to the command \fBcreate\fR in the namespace \fBinterp\fR that is a child of namespace \fB::safe\fR, which in turn is a child of the global namespace, \fB::\fR. .PP If you want to access commands and variables from another namespace, you must use some extra syntax. Names must be qualified by the namespace that contains them. From the global namespace, we might access the \fBCounter\fR procedures like this: .CS Counter::bump 5 Counter::Reset .CE We could access the current count like this: .CS puts "count = $Counter::num" .CE When one namespace contains another, you may need more than one qualifier to reach its elements. If we had a namespace \fBFoo\fR that contained the namespace \fBCounter\fR, you could invoke its \fBbump\fR procedure from the global namespace like this: .CS Foo::Counter::bump 3 .CE .PP You can also use qualified names when you create and rename commands. For example, you could add a procedure to the \fBFoo\fR namespace like this: .CS proc Foo::Test {args} {return $args} .CE And you could move the same procedure to another namespace like this: .CS rename Foo::Test Bar::Test .CE .PP There are a few remaining points about qualified names that we should cover. Namespaces have nonempty names except for the global namespace. \fB::\fR is disallowed in simple command, variable, and namespace names except as a namespace separator. Extra colons in any separator part of a qualified name are ignored; i.e. two or more colons are treated as a namespace separator. A trailing \fB::\fR in a qualified variable or command name refers to the variable or command named {}. However, a trailing \fB::\fR in a qualified namespace name is ignored. .SH "NAME RESOLUTION" .PP In general, all Tcl commands that take variable and command names support qualified names. This means you can give qualified names to such commands as \fBset\fR, \fBproc\fR, \fBrename\fR, and \fBinterp alias\fR. If you provide a fully-qualified name that starts with a \fB::\fR, there is no question about what command, variable, or namespace you mean. However, if the name does not start with a \fB::\fR (i.e., is \fIrelative\fR), Tcl follows a fixed rule for looking it up: Command and variable names are always resolved by looking first in the current namespace, and then in the global namespace. Namespace names, on the other hand, are always resolved by looking in only the current namespace. .PP In the following example, .CS set traceLevel 0 \fBnamespace eval\fR Debug { printTrace $traceLevel } .CE Tcl looks for \fBtraceLevel\fR in the namespace \fBDebug\fR and then in the global namespace. It looks up the command \fBprintTrace\fR in the same way. If a variable or command name is not found in either context, the name is undefined. To make this point absolutely clear, consider the following example: .CS set traceLevel 0 \fBnamespace eval\fR Foo { variable traceLevel 3 \fBnamespace eval\fR Debug { printTrace $traceLevel } } .CE Here Tcl looks for \fBtraceLevel\fR first in the namespace \fBFoo::Debug\fR. Since it is not found there, Tcl then looks for it in the global namespace. The variable \fBFoo::traceLevel\fR is completely ignored during the name resolution process. .PP You can use the \fBnamespace which\fR command to clear up any question about name resolution. For example, the command: .CS \fBnamespace eval\fR Foo::Debug {\fBnamespace which\fR \-variable traceLevel} .CE returns \fB::traceLevel\fR. On the other hand, the command, .CS \fBnamespace eval\fR Foo {\fBnamespace which\fR \-variable traceLevel} .CE returns \fB::Foo::traceLevel\fR. .PP As mentioned above, namespace names are looked up differently than the names of variables and commands. Namespace names are always resolved in the current namespace. This means, for example, that a \fBnamespace eval\fR command that creates a new namespace always creates a child of the current namespace unless the new namespace name begins with \fB::\fR. .PP Tcl has no access control to limit what variables, commands, or namespaces you can reference. If you provide a qualified name that resolves to an element by the name resolution rule above, you can access the element. .PP You can access a namespace variable from a procedure in the same namespace by using the \fBvariable\fR command. Much like the \fBglobal\fR command, this creates a local link to the namespace variable. If necessary, it also creates the variable in the current namespace and initializes it. Note that the \fBglobal\fR command only creates links to variables in the global namespace. It is not necessary to use a \fBvariable\fR command if you always refer to the namespace variable using an appropriate qualified name. .SH "IMPORTING COMMANDS" .PP Namespaces are often used to represent libraries. Some library commands are used so frequently that it is a nuisance to type their qualified names. For example, suppose that all of the commands in a package like BLT are contained in a namespace called \fBBlt\fR. Then you might access these commands like this: .CS Blt::graph .g \-background red Blt::table . .g 0,0 .CE If you use the \fBgraph\fR and \fBtable\fR commands frequently, you may want to access them without the \fBBlt::\fR prefix. You can do this by importing the commands into the current namespace, like this: .CS \fBnamespace import\fR Blt::* .CE This adds all exported commands from the \fBBlt\fR namespace into the current namespace context, so you can write code like this: .CS graph .g \-background red table . .g 0,0 .CE The \fBnamespace import\fR command only imports commands from a namespace that that namespace exported with a \fBnamespace export\fR command. .PP Importing \fIevery\fR command from a namespace is generally a bad idea since you don't know what you will get. It is better to import just the specific commands you need. For example, the command .CS \fBnamespace import\fR Blt::graph Blt::table .CE imports only the \fBgraph\fR and \fBtable\fR commands into the current context. .PP If you try to import a command that already exists, you will get an error. This prevents you from importing the same command from two different packages. But from time to time (perhaps when debugging), you may want to get around this restriction. You may want to reissue the \fBnamespace import\fR command to pick up new commands that have appeared in a namespace. In that case, you can use the \fB\-force\fR option, and existing commands will be silently overwritten: .CS \fBnamespace import\fR \-force Blt::graph Blt::table .CE If for some reason, you want to stop using the imported commands, you can remove them with a \fBnamespace forget\fR command, like this: .CS \fBnamespace forget\fR Blt::* .CE This searches the current namespace for any commands imported from \fBBlt\fR. If it finds any, it removes them. Otherwise, it does nothing. After this, the \fBBlt\fR commands must be accessed with the \fBBlt::\fR prefix. .PP When you delete a command from the exporting namespace like this: .CS rename Blt::graph "" .CE the command is automatically removed from all namespaces that import it. .SH "EXPORTING COMMANDS" You can export commands from a namespace like this: .CS \fBnamespace eval\fR Counter { \fBnamespace export\fR bump reset variable Num 0 variable Max 100 proc bump {{by 1}} { variable Num incr Num $by Check return $Num } proc reset {} { variable Num set Num 0 } proc Check {} { variable Num variable Max if {$Num > $Max} { error "too high!" } } } .CE The procedures \fBbump\fR and \fBreset\fR are exported, so they are included when you import from the \fBCounter\fR namespace, like this: .CS \fBnamespace import\fR Counter::* .CE However, the \fBCheck\fR procedure is not exported, so it is ignored by the import operation. .PP The \fBnamespace import\fR command only imports commands that were declared as exported by their namespace. The \fBnamespace export\fR command specifies what commands may be imported by other namespaces. If a \fBnamespace import\fR command specifies a command that is not exported, the command is not imported. .SH "SCOPED SCRIPTS" The \fBnamespace code\fR command is the means by which a script may be packaged for evaluation in a namespace other than the one in which it was created. It is used most often to create event handlers, Tk bindings, and traces for evaluation in the global context. For instance, the following code indicates how to direct a variable trace callback into the current namespace: .CS \fBnamespace eval\fR a { variable b proc theTraceCallback { n1 n2 op } { upvar 1 $n1 var puts "the value of $n1 has changed to $var" return } trace variable b w [\fBnamespace code\fR theTraceCallback] } set a::b c .CE When executed, it prints the message: .CS the value of a::b has changed to c .CE .SH EXAMPLES Create a namespace containing a variable and an exported command: .CS \fBnamespace eval\fR foo { variable bar 0 proc grill {} { variable bar puts "called [incr bar] times" } \fBnamespace export\fR grill } .CE .PP Call the command defined in the previous example in various ways. .CS # Direct call foo::grill # Import into current namespace, then call local alias namespace import foo::grill grill .CE .PP Look up where the command imported in the previous example came from: .CS puts "grill came from [\fBnamespace origin\fR grill]" .CE .SH "SEE ALSO" variable(n) .SH KEYWORDS exported, internal, variable