Back to list of tutorials

Preparations

If You're at an Organized Course

If you are taking one of the formally organized courses, everything has been set up for you on the provided laptop. The only thing you will need to do is run the following commands in every new terminal window (aka shell) you open throughout this tutorial. Copy and paste the commands below to get started:

export SUBJECTS_DIR=$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd $SUBJECTS_DIR/glm

To copy: Highlight the command in the box above, right click and select copy (or use keyboard shortcut Ctrl+c), then use the middle button of your mouse to click inside the terminal window (this will paste the command). Press enter to run the command.

These two commands set the SUBJECTS_DIR variable to the directory where the data is stored and then navigates into this directory. You can now skip ahead to the tutorial (below the gray line).

If You're not at an Organized Course

If you are NOT taking one of the formally organized courses, then to follow this exercise exactly be sure you've downloaded the tutorial data set before you begin. If you choose not to download the data set you can follow these instructions on your own data, but you will have to substitute your own specific paths and subject names. These are the commands that you need to run before getting started:

<source_freesurfer>
export TUTORIAL_DATA=<path_to_your_tutorial_data>
export SUBJECTS_DIR=$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd $SUBJECTS_DIR/glm

If you are not using the tutorial data you should set your SUBJECTS_DIR to the directory in which the recon(s) of the subject(s) you will use for this tutorial are located.


Introduction

This tutorial is designed to introduce you to the "command-line" group analysis stream in FreeSurfer (as opposed to QDEC which is GUI-driven), including correction for multiple comparisons. While this tutorial shows you how to perform a surface-based thickness study, it is important to realize that most of the concepts learned here apply to any group analysis in FreeSurfer, surface or volume, thickness or fMRI.

Here are some useful Group Analysis links you might want to refer back to at a later time:
QDEC Tutorial
FSGD Format
FSGD Examples
DODS vs DOSS

This Data Set

The data used for this tutorial is 40 subjects from Randy Buckner's lab. It consists of males and females ages 18 to 93. You can see the demographics here. You will perform an analysis looking for the effect of age on cortical thickness accounting for the effects of gender in the analysis. This is the same data set used in the QDEC Tutorial, and you will get the same result.

General Linear Model (GLM) DODS Setup

Design Matrix/FSGD File

In this tutorial, we will model the thickness as a straight line. A line has two parameters: intercept (or offset) and a slope. For this example:

  1. The slope is the change of thickness with age.
  2. The intercept/offset is interpreted as the thickness at age=0.

Parameter estimates are also called "regression coefficients".

To account for effects of gender, we will model each sex with its own line, meaning that there will be four linear parameters (also called "betas"):

  1. Intercept for Females
  2. Intercept for Males
  3. Slope for Females
  4. Slope for Males

In FreeSurfer, this type of design is called DODS (for "Different-Offset, Different-Slope").

You can either create your own design matrices, or, if you specify your design as a FreeSurfer Group Descriptor File (FSGD), FreeSurfer will create the design matrices for you. The FSGD file is a simple text file. See this page for the format. The demographics page also has an example FSGD file for this data.

Things to do:

  1. Create an FSGD file for the above design. One (gender_age.fsgd) already exists so that you can continue with the exercises.

Information on how to create/view text files can be found here.

Contrasts

A contrast is a vector that embodies the hypothesis we want to test. In this case, we wish to test the change in thickness with age after removing the effects of gender. To do this, create a simple text file with the following numbers:

0 0 0.5 0.5

Notes:

  1. There is one value for each parameter (so 4 values).
  2. The intercept/offset values are 0 (nuisance).
  3. The slope values are 0.5 so as to average the F and M slopes.
  4. You'll find we created the contrast matrix for you already. It's a file called lh-Avg-thickness-age-Cor.mtx.

Assemble the Data (mris_preproc)

Assembling the data simply means:

  1. Resampling each subject's data into a common space.
  2. Concatenating all the subjects' into a single file.
  3. Spatial smoothing (can be done between 1 and 2).

This can be done in two equivalent ways:

Previously Cached (qcached) Data

When you run recon-all with the -qcache option, recon-all will resample data onto the average subject (called fsaverage) and smooth it at various FWHM (full-width/half-max) values, usually 0, 5, 10, 10, 20, and 25mm. This can speed later processing. The data for this tutorial was ran with the -qcache option, so the FWHM are already cached. Run this command to assemble your data:

mris_preproc --fsgd gender_age.fsgd \
  --cache-in thickness.fwhm10.fsaverage \
  --target fsaverage \
  --hemi lh \
  --out lh.gender_age.thickness.10.mgh

Notes:

  1. Only takes a few seconds because the data have been cached.
  2. The FSGD file lists all the subjects, helps keep order.
  3. The independent variable is the thickness smoothed to 10mm FWHM.
  4. The target is the average subject, fsaverage. This subject is included with the FreeSurfer distribution.

  5. The data are for the left hemisphere.
  6. The output is lh.gender_age.thickness.10.mgh (which already exists).

Things to do:

  1. Run mri_info on lh.gender_age.thickness.10.mgh to find its dimensions:

mri_info lh.gender_age.thickness.10.mgh

Uncached Data

In the case that you have not cached the data, you can perform the same operations manually using the two commands below. THESE NEXT TWO COMMANDS ARE OPTIONAL FOR THE TUTORIAL, AND WILL TAKE ABOUT 10 MINUTES TO RUN. The data has already been pre-processed for you.

mris_preproc --fsgd gender_age.fsgd \
  --target fsaverage \
  --hemi lh \
  --meas thickness \
  --out lh.gender_age.thickness.00.mgh

Notes:

  1. This resamples each subject's left hemisphere data to fsaverage.
  2. Output is lh.gender_age.thickness.00.mgh, which is unsmoothed.

mri_surf2surf --hemi lh \
  --s fsaverage \
  --sval lh.gender_age.thickness.00.mgh \
  --fwhm 10 \
  --cortex \
  --tval lh.gender_age.thickness.10B.mgh
  1. This smooths by 10mm FWHM.
  2. "--cortex" means only smooth areas in cortex (exclude medial wall). This is automatically done with qcache. You can also specify other labels.
  3. Output is lh.gender_age.thickness.10B.mgh.

GLM Analysis (mri_glmfit)

mri_glmfit \
  --y lh.gender_age.thickness.10.mgh \
  --fsgd gender_age.fsgd dods\
  --C lh-Avg-thickness-age-Cor.mtx \
  --surf fsaverage lh \
  --cortex \
  --glmdir lh.gender_age.glmdir

Notes:

  1. Input is lh.gender_age.thickness.10.mgh.
  2. Same FSGD used as with mris_preproc. Maintains subject order!
  3. DODS is specified (it is the default).
  4. Only one contrast is used (lh-Avg-thickness-age-Cor.mtx) but you can specify multiple contrasts.
  5. "--cortex" specifies that the analysis only be done in cortex (ie, medial wall is zeroed out). Other labels can be used.
  6. The output directory is lh.gender_age.glmdir.
  7. Should only take about 1min to run.

Things to do:

When this command is finished the glm directory will contain a sub-directory called lh.gender_age.glmdir. There will be a number of output files in this directory, as well as two other directories. If you did an ls in your glmdir there will be:

y.fsgd -- copy of input FSGD file  (text)
Xg.dat -- design matrix  (text)
mask.mgh -- binary mask (surface overlay)
beta.mgh -- all parameter estimates (surface overlay)
rstd.mgh -- residual standard deviation (surface overlay)
sar1.mgh -- residual spatial AR1  (surface overlay)
fwhm.dat -- average FWHM of residual (text)
dof.dat  -- degrees of freedom (text)
lh-Avg-thickness-age-Cor -- contrast subdirectory
mri_glmfit.log -- log file (text, send this with bug reports)

Study Questions:

  1. What was the DOF for this experiment?
  2. What was the FWHM?
  3. How many frames does beta have? Why? (hint: cd into the "lh.gender_age.glmdir" directory and run: mri_info beta.mgh)

There will be a subdirectory for each contrast that you specify. The name of the directory will be that of the contrast matrix file (without the .mtx extension). The lh-Avg-thickness-age-Cor directory will have the following files:

C.dat -- original contrast matrix (text)
gamma.mgh -- contrast effect size (surface overlay)
F.mgh -- F ratio of contrast  (surface overlay)
sig.mgh -- significance, -log10(pvalue), uncorrected (surface overlay)

View the uncorrected significance map with freeview:

freeview -f $SUBJECTS_DIR/fsaverage/surf/lh.inflated:annot=aparc.annot:annot_outline=1:overlay=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/sig.mgh:overlay_threshold=4,5 -viewport 3d

You should see:

glm1_fv5.3.jpg glm2_fv5.3.jpg

Notes:

  1. The threshold is set to 4, meaning vertices with p<.0001, uncorrected, will have color.

  2. Blue means a negative correlation (thickness decreases with age), red is positive correlation.
  3. Click on a point in the Precentral Gyrus. What is its value? What does it mean?

Viewing the medial surface, change the overlay threshold to something very, very low (say, .01), by clicking Configure Overlay and set the Min value to 0.01. Click Apply, or check the Automatically apply changes checkbox.

You should see:

glm3_fv5.3.jpg

Notes:

  1. Almost all of cortex now has color.
  2. The non-cortical areas are still blank (0) because they were excluded with --cortex in mri_glmfit above.

Clusterwise Correction for Multiple Comparisons

Note: The method used is based on: Smoothing and cluster thresholding for cortical surface-based group analysis of fMRI data. Hagler DJ Jr, Saygin AP, Sereno MI. NeuroImage (2006).

Remember to run the following commands in every new terminal window (aka shell) you open throughout this tutorial (see top of page for detailed instructions):

If You're at an Organized Course:

export SUBJECTS_DIR=$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd $SUBJECTS_DIR/glm

If You're not at an Organized Course:

<source_freesurfer>
export TUTORIAL_DATA=<path_to_your_tutorial_data>
export SUBJECTS_DIR=$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd $SUBJECTS_DIR/glm


To perform a cluster-wise correction for multiple comparisons, we will run a simulation. The simulation is a way to get a measure of the distribution of the maximum cluster size under the null hypothesis. This is done by iterating over the following steps:

  1. Synthesize a z map.
  2. Smooth z map (using residual FWHM).
  3. Threshold z map (level and sign).
  4. Find clusters in thresholded map.
  5. Record area of maximum cluster.
  6. Repeat over desired number of iterations (usually > 5000).

In FreeSurfer, this information is stored in a simple text file called a CSD (Cluster Simulation Data).

Once we have the distribution of the maximum cluster size, we correct for multiple comparisons by:

  1. Going back to the original data.
  2. Thresholding using same level and sign.
  3. Finding clusters in thresholded map.
  4. For each cluster, p = probability of seeing a maximum cluster that size or larger during simulation.

Run the simulation

All these steps are performed with the mri_glmfit-sim:

mri_glmfit-sim \
  --glmdir lh.gender_age.glmdir \
  --cache 4 neg \
  --cwp  0.05\
  --2spaces

Notes:

  1. Specify the same GLM directory (--glmdir).
  2. Use precomputed Z Monte Carlo simulation (--cache).
  3. Vertex-wise/cluster-forming threshold of 4 (p < .0001).

  4. Specify the sign (neg for negative, pos, or abs).
  5. --cwp 0.05 : Keep clusters that have cluster-wise p-values < 0.05. To see all clusters, set to .999.

  6. --2spaces : adjust p-values for two hemispheres (this assumes you will eventually look at the right hemisphere too).
  7. You can also generate your own precomputed data, but you only need to do this if you have a different average subject or you are not looking over all of cortex.
  8. You can also use a permutation simulation instead of Z Monte Carlo. Run mri_glmfit-sim --help to get more information.

View the Corrected Results

In the contrast subdirectory, you will see several new files, all beginning with mc-z:

cache.th40.neg.sig.cluster.summary - summary of clusters (text)
cache.th40.neg.sig.cluster.mgh - cluster-wise corrected map (overlay)
cache.th40.neg.sig.ocn.annot - annotation of clusters

First, look at the cluster summary (or click here):

less lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/cache.th40.neg.sig.cluster.summary

You can hit the 'Page Up' and 'Page Down' buttons to see the rest of the file. Or click here to view the contents of the file. (To exit the less command, hit the 'q' button.)

Notes:

  1. This is a list of all the clusters that were found (27 of them).
  2. The CWP column is the cluster-wise probability (the number you are interested in). It is a simple p (ie, NOT -log10(p)).
  3. Cluster number 1 has a CWP of p=.0002.
  4. Cluster number 21 has a CWP of p=.03233.

Load the cluster annotation in freeview

freeview -f $SUBJECTS_DIR/fsaverage/surf/lh.inflated:overlay=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/cache.th40.neg.sig.cluster.mgh:overlay_threshold=2,5:annot=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/cache.th40.neg.sig.ocn.annot -viewport 3d

You should see clusters identical in shape to those pictured in the snapshots below, the arbitrary color values associated with each cluster may be different though:

lateral_clusters5.3.jpg medial_clusters5.3.jpg

Notes:

  1. These are all clusters, regardless of significance.
  2. When you click on a cluster, the label will tell you the cluster number (eg, cluster-021).

Things to do:

  1. Find and click on cluster 1. It is blue and has a value of -3.69899 since this is log10(.0002). The -3.69899 is because the correlation is negative.
  2. Find and click on cluster 21. Its value is -1.49034 because this is log10(.03233). Note that if you turn off the annotation, the cluster 21 is not visible because its significance is worse than the threshold we set (-fthresh 2, p < .01).

  3. All vertices within a cluster are the same value (the p-value of the cluster).
  4. You can change the cluster-wise threshold by first clicking on "Show outline only" underneath the Annotation drop down menu. Then click on Configure Overlay , and set the Min value to your desired level. Alternatively, you can drag the red flag to adjust the cluster-wise threshold. As you do this clusters will appear or disappear from the surface.