Differences between revisions 11 and 12
 Deletions are marked like this. Additions are marked like this. Line 39: Line 39: This tutorial is designed to introduce you to the "command-line" group analysis stream in FreeSurfer (as opposed to QDEC which is GUI-driven), including correction for multiple comparisons. While this tutorial shows you how to perform a surface-based thickness study, it is important to realize that most of the concepts learned here apply to any group analysis in FreeSurfer, surface or volume, thickness or fMRI. Here are some useful Group Analysis links you might want to refer back to at a later time: <
> [[FsTutorial/QdecGroupAnalysis_freeview|QDEC Tutorial]]<
> [[FsgdFormat|FSGD Format]]<
> [[FsgdExamples|FSGD Examples]]<
> [[DodsDoss|DODS vs DOSS]]<
> This tutorial is designed to introduce you to the "command-line" group analysis stream in FreeSurfer (as opposed to QDEC which is GUI-driven), including correction for multiple comparisons. While this tutorial shows you how to perform a surface-based thickness study, it is important to realize that most of the concepts learned here apply to any group analysis in FreeSurfer, surface, volume, thickness or fMRI. Here are some useful Group Analysis links you might want to refer back to at a later time: <
> [[FsTutorial/QdecGroupAnalysis_freeview|QDEC Tutorial]]<
> [[FsgdFormat|FSGD Format]]<
> [[FsgdExamples|FSGD Examples]]<
> [[DodsDoss|DODS vs DOSS]]<
> Line 46: Line 46: In this tutorial, we will model the thickness as a straight line. A line has two parameters: intercept (or offset) and a slope. For this example: In this tutorial, we will model the thickness as a straight line. A line has two parameters: an intercept (or offset) and a slope. For this example: Line 90: Line 90: == Previously Cached (qcached) Data == == 1. Previously Cached (qcached) Data == Line 121: Line 121: == Uncached Data == == 2. Uncached Data ==

# Preparations

## If You're at an Organized Course

If you are taking one of the formally organized courses, everything has been set up for you on the provided laptop. The only thing you will need to do is run the following commands in every new terminal window (aka shell) you open throughout this tutorial. Copy and paste the commands below to get started:

```export SUBJECTS_DIR=\$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd \$SUBJECTS_DIR/glm```

To copy: Highlight the command in the box above, right click and select copy (or use keyboard shortcut Ctrl+c), then use the middle button of your mouse to click inside the terminal window (this will paste the command). Press enter to run the command.

These two commands set the SUBJECTS_DIR variable to the directory where the data is stored and then navigates into the sub-directory you'll be working in. You can now skip ahead to the tutorial (below the gray line).

## If You're Not at an Organized Course

If you are NOT taking one of the formally organized courses, then to follow this exercise exactly be sure you've downloaded the tutorial data set before you begin. If you choose not to download the data set, you can follow these instructions on your own data, but you will have to substitute your own specific paths and subject names. These are the commands that you need to run before getting started:

```## bash
<source_freesurfer>
export TUTORIAL_DATA=<path_to_your_tutorial_data>
export SUBJECTS_DIR=\$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd \$SUBJECTS_DIR/glm
## tcsh
source \$FREESURFER_HOME/SetUpFreeSurfer.csh
setenv TUTORIAL_DATA <path_to_your_tutorial_data>
setenv SUBJECTS_DIR \$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd \$SUBJECTS_DIR/glm```

Information on how to source FreeSurfer is located here.

If you are not using the tutorial data, you should set your SUBJECTS_DIR to the directory in which the recon(s) of the subject(s) you will use for this tutorial are located.

# Introduction

This tutorial is designed to introduce you to the "command-line" group analysis stream in FreeSurfer (as opposed to QDEC which is GUI-driven), including correction for multiple comparisons. While this tutorial shows you how to perform a surface-based thickness study, it is important to realize that most of the concepts learned here apply to any group analysis in FreeSurfer, surface, volume, thickness or fMRI. Here are some useful Group Analysis links you might want to refer back to at a later time:
QDEC Tutorial
FSGD Format
FSGD Examples
DODS vs DOSS

# This Data Set

The data used for this tutorial is 40 subjects from Randy Buckner's lab. It consists of males and females, ages 18 to 93. You can see the demographics here. You will perform an analysis looking for the effect of age on cortical thickness, accounting for the effects of gender in the analysis. This is the same data set used in the QDEC Tutorial, and you will get the same result.

# General Linear Model (GLM) DODS Setup

## Design Matrix/FSGD File

In this tutorial, we will model the thickness as a straight line. A line has two parameters: an intercept (or offset) and a slope. For this example:

1. The slope is the change of thickness with age.
2. The intercept/offset is interpreted as the thickness at age=0.

Parameter estimates are also called "regression coefficients". To account for effects of gender, we will model each sex with its own line, meaning that there will be four linear parameters (also called "betas"):

1. Intercept for Females
2. Intercept for Males
3. Slope for Females
4. Slope for Males

In FreeSurfer, this type of design is called DODS (for "Different-Offset, Different-Slope").

You can either create your own design matrices, or, if you specify your design as a FreeSurfer Group Descriptor File (FSGD), FreeSurfer will create the design matrices for you. The FSGD file is a simple text file you create. It is not generated by FreeSurfer. See this page for the format. The demographics page also has an example FSGD file for this data.

Things to do:

1. Create an FSGD file for the above design. For the tutorial, one (gender_age.fsgd) already exists so that you can continue with the exercises.

Information on how to create/view text files can be found here.

## Contrasts

A contrast is a vector that embodies the hypothesis we want to test. In this case, we wish to test the change in thickness with age, after removing the effects of gender. To do this, create a simple text file with the following numbers (if you're using the tutorial data, this has already been done for you):

`0 0 0.5 0.5`

Notes:

1. There is one value for each parameter (so 4 values).
2. The intercept/offset values are 0 (nuisance).
3. The slope values are 0.5 so as to average the Female and Male slopes.
4. You'll find we created the contrast matrix for you already for this tutorial. It's a file called lh-Avg-thickness-age-Cor.mtx. You will need to create your own contrast matrix when testing your own hypotheses on your data. FreeSurfer doesn't automatically create this file. There are examples of FSGD files and contrast matrices for many different hypotheses here.

# Assemble the Data (mris_preproc)

Assembling the data simply means:

1. Resampling each subject's data into a common space.
2. Concatenating all the subjects' into a single file.
3. Spatial smoothing (can be done between 1 and 2).

This can be done in two equivalent ways:

## 1. Previously Cached (qcached) Data

When you run recon-all with the -qcache option, recon-all will resample data onto the average subject (called fsaverage) and smooth it at various FWHM (full-width/half-max) values, usually 0, 5, 10, 15, 20, and 25mm. This can speed up later processing. The data for this tutorial was run with the -qcache option, so the FWHM are already cached. Run this command to assemble your previously cached data:

```mris_preproc --fsgd gender_age.fsgd \
--cache-in thickness.fwhm10.fsaverage \
--target fsaverage \
--hemi lh \
--out lh.gender_age.thickness.10.mgh```

NOTE: The backslash allows you to copy and paste multiple lines of code as one command. We use this throughout the tutorials to display the commands in a more easy-to-read manner, while still allowing you to copy and paste. Whenever you are typing in your own commands, instead of copying and pasting a command written out across multiple lines, a backslash is not necessary.

Notes:

1. Only takes a few seconds because the data have been cached.
2. The FSGD file lists all the subjects, helps keep order.
3. The independent variable is the thickness smoothed to 10mm FWHM.
4. The target is the average subject, fsaverage. This subject is included with the FreeSurfer distribution.

5. The data is for the left hemisphere.
6. Since the data is already cached, this mris_preproc command just creates a stack of all the smoothed thickness data from each subject into one file as output.

7. The output of this command is given by the --out flag. Here we call it lh.gender_age.thickness.10.mgh.

Things to do:

1. Run mri_info on lh.gender_age.thickness.10.mgh to find its dimensions:

`mri_info lh.gender_age.thickness.10.mgh`

## 2. Uncached Data

In the case that you have not cached the data, you can perform the same operations manually using the two commands below. These two commands give the equivalent results as running recon-all with -qcache. However, the commands below only create output for unsmoothed data and data smoothed to 10mm FWHM. qcache, on the other hand, smooths the data for a range of different FWHM vaules.

THESE NEXT TWO COMMANDS ARE OPTIONAL FOR THE TUTORIAL, AND WILL TAKE ABOUT 10 MINUTES TO RUN.

The tutorial data has already been pre-processed (cached) for you.

```mris_preproc --fsgd gender_age.fsgd \
--target fsaverage \
--hemi lh \
--meas thickness \
--out lh.gender_age.thickness.00.mgh```

Notes:

1. This resamples each subject's left hemisphere data to fsaverage.
2. Output is lh.gender_age.thickness.00.mgh, which is unsmoothed.

```mri_surf2surf --hemi lh \
--s fsaverage \
--sval lh.gender_age.thickness.00.mgh \
--fwhm 10 \
--cortex \
--tval lh.gender_age.thickness.10B.mgh```
1. This smooths each subject's resampled data by 10mm FWHM.
2. "--cortex" means only smooth areas in cortex (exclude medial wall). This is automatically done with qcache. You can also specify other labels.
3. Output is lh.gender_age.thickness.10B.mgh. (We have named the output file ...10B.mgh because the precreated file from running qcache ...10.mgh already exists.)

# GLM Analysis (mri_glmfit)

```mri_glmfit \
--y lh.gender_age.thickness.10.mgh \
--fsgd gender_age.fsgd dods\
--C lh-Avg-thickness-age-Cor.mtx \
--surf fsaverage lh \
--cortex \
--glmdir lh.gender_age.glmdir```

Notes:

1. Input is lh.gender_age.thickness.10.mgh.
2. Same FSGD used as with mris_preproc. Maintains subject order!
3. DODS is specified (it is the default).
4. Only one contrast is used (lh-Avg-thickness-age-Cor.mtx), but you can specify multiple contrasts.
5. "--cortex" specifies that the analysis only be done in cortex (ie, medial wall is zeroed out). Other labels can be used.
6. The output directory is lh.gender_age.glmdir.
7. Should only take about 1min to run.

Things to do:

When this command is finished the glm directory will contain a sub-directory called lh.gender_age.glmdir. There will be a number of output files in this directory, as well as other subdirectories. Run:

`ls lh.gender_age.glmdir`

and you will see the following files (descriptions are also included below, but don't show up in your terminal screen):

```beta.mgh -- all parameter estimates (surface overlay)
dof.dat  -- degrees of freedom (text)
fwhm.dat -- average FWHM of residual (text)
lh-Avg-thickness-age-Cor -- contrast subdirectory
mri_glmfit.log -- log file (text, send this with bug reports)
rstd.mgh -- residual standard deviation (surface overlay)
rvar.mgh -- residual variance (surface overlay)
sar1.mgh -- residual spatial AR1  (surface overlay)
surface -- the subject and hemisphere used for this analysis (text)
Xg.dat -- design matrix  (text)
X.mat -- design matrix (MATLAB format)
y.fsgd -- copy of input FSGD file  (text)```

NOTE: You may also see some temporary directories (with names starting with tmp) or log files, which you can ignore.

Study Questions:

1. What was the DOF for this experiment?
2. What was the FWHM?
3. How many frames does beta have? Why? (hint: run mri_info on lh.gender_age.glmdir/beta.mgh)

There will be a subdirectory for each contrast that you specify. The name of the directory will be that of the contrast matrix file (without the .mtx extension). For example, to inspect the lh-Avg-thickness-age-Cor directory, run

`ls lh.gender_age.glmdir/lh-Avg-thickness-age-Cor`

and you will see the following files:

```C.dat -- original contrast matrix (text)
cnr.mgh -- contrast-to-noise ratio (surface overlay)
efficiency.dat -- statistical efficiency for the contrast (text)
F.mgh -- F ratio of contrast  (surface overlay)
gamma.mgh -- contrast effect size (surface overlay)
gammavar.mgh --contrast variance (surface overlay)
maxvox.dat -- voxel with the maximum statistic (text)
pcc.mgh -- partial (pearson) correlation coefficient (surface overlay)
sig.mgh -- significance, -log10(pvalue), uncorrected (surface overlay)
z.mgh -- z-stat that corresponds to the significance (surface overlay)```

View the uncorrected significance map with freeview. First, make sure you are in the correct directory:

`cd \$SUBJECTS_DIR/glm`

Then, run this command to visualize the data:

`freeview -f \$SUBJECTS_DIR/fsaverage/surf/lh.inflated:annot=aparc.annot:annot_outline=1:overlay=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/sig.mgh:overlay_threshold=4,5 -viewport 3d`

You should see something similar to this:

Notes:

1. The threshold is set to 4, meaning vertices with p<.0001, uncorrected, will have color.

2. Blue means a negative correlation (thickness decreases with age), red is positive correlation.
3. Click on a point in the Precentral Gyrus. What is its value? What does it mean?

Viewing the medial surface, change the overlay threshold to something very, very low (say, .01), by clicking Configure (under the Overlay dropdown menu that says sig.mgh) and set the Min value to 0.01. Click Apply, or check the Automatically apply changes checkbox.

You should see something like this:

Notes:

1. Almost all of the cortex now has color.
2. The non-cortical areas are still blank (0) because they were excluded with --cortex in mri_glmfit above.

All the surface overlays created by mri_glmfit, not just the significance map, can also be inspected in freeview. Simply replace the path to the sig.mgh file in the command above to the surface overlay that you would like to see. For example, this will display the F ratio instead of the significance map:

`freeview -f \$SUBJECTS_DIR/fsaverage/surf/lh.inflated:annot=aparc.annot:annot_outline=1:overlay=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/F.mgh:overlay_threshold=20,50 -viewport 3d`

Text output and log files can be opened in any text editor.

# Clusterwise Correction for Multiple Comparisons

#### Remember to run the following commands in every new terminal window (aka shell) you open throughout this tutorial (see top of page for detailed instructions):

If You're at an Organized Course:

```export SUBJECTS_DIR=\$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd \$SUBJECTS_DIR/glm```

If You're Not at an Organized Course:

```## bash
<source_freesurfer>
export TUTORIAL_DATA=<path_to_your_tutorial_data>
export SUBJECTS_DIR=\$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd \$SUBJECTS_DIR/glm
## tcsh
source \$FREESURFER_HOME/SetUpFreeSurfer.csh
setenv TUTORIAL_DATA <path_to_your_tutorial_data>
setenv SUBJECTS_DIR \$TUTORIAL_DATA/buckner_data/tutorial_subjs/group_analysis_tutorial
cd \$SUBJECTS_DIR/glm```

To perform a cluster-wise correction for multiple comparisons, we will run a simulation. The simulation is a way to get a measure of the distribution of the maximum cluster size under the null hypothesis. This is done by iterating over the following steps:

1. Synthesize a z map.
2. Smooth z map (using residual FWHM).
3. Threshold z map (level and sign).
4. Find clusters in thresholded map.
5. Record area of maximum cluster.
6. Repeat over desired number of iterations (usually > 5,000).

In FreeSurfer, this information is stored in a simple text file called a CSD (Cluster Simulation Data) file.

Once we have the distribution of the maximum cluster size, we correct for multiple comparisons by:

1. Going back to the original data.
2. Thresholding using same level and sign.
3. Finding clusters in thresholded map.
4. For each cluster, p = probability of seeing a maximum cluster that size or larger during simulation.

## Run the simulation

All these steps are performed with the command mri_glmfit-sim:

```mri_glmfit-sim \
--glmdir lh.gender_age.glmdir \
--cache 4 neg \
--cwp  0.05\
--2spaces```

Notes:

1. Specify the same GLM directory (--glmdir).
2. Use precomputed Z Monte Carlo simulation (--cache).
3. Vertex-wise/cluster-forming threshold of 4 (p < .0001).

4. Specify the sign ("neg" for negative, "pos" for positive, or "abs" for absolute/unsigned).
5. --cwp 0.05 : Keep clusters that have cluster-wise p-values < 0.05. To see all clusters, set to .999.

6. --2spaces : adjust p-values for two hemispheres (this assumes you will eventually look at the right hemisphere too).
7. You can also generate your own precomputed data, but you only need to do this if you have a different average subject or you are not looking over all of the cortex.
8. You can also use a permutation simulation instead of Z Monte Carlo. Run mri_glmfit-sim --help to get more information.

## View the Corrected Results

In the contrast subdirectory, you will see several new files by running:

`ls lh.gender_age.glmdir/lh-Avg-thickness-age-Cor`

You will see the following new files:

```cache.th40.neg.sig.pdf.dat -- probability distribution function of clusterwise correction
cache.th40.neg.sig.cluster.mgh -- cluster-wise corrected map (overlay)
cache.th40.neg.sig.cluster.summary -- summary of clusters (text)
cache.th40.neg.sig.masked.mgh -- uncorrected sig values masked by the clusters that survive correction
cache.th40.neg.sig.ocn.annot -- output cluster number (annotation of clusters)
cache.th40.neg.sig.ocn.mgh -- output cluster number (segmentation showing where each numbered cluster is)
cache.th40.neg.sig.voxel.max.dat -- maximum voxel-wise significance
cache.th40.neg.sig.voxel.mgh -- voxel-wise map corrected for multiple comparisons at a voxel (rather than cluster) level
cache.th40.neg.sig.y.ocn.dat -- the average value of each subject in each cluster```

`less lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/cache.th40.neg.sig.cluster.summary`

You can hit the 'Page Up' and 'Page Down' buttons or the 'Up' and 'Down' arrow keys to see the rest of the file. (To exit the less command, hit the 'q' button.) Notes:

1. This is a list of all the clusters that were found (19 of them).
2. The CWP column is the cluster-wise probability (the number you are interested in). It is a simple p (ie, NOT -log10(p)).
3. For example, cluster number 1 has a CWP of p=.0002.

Load the cluster annotation in freeview:

`freeview -f \$SUBJECTS_DIR/fsaverage/surf/lh.inflated:overlay=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/cache.th40.neg.sig.cluster.mgh:overlay_threshold=2,5:annot=lh.gender_age.glmdir/lh-Avg-thickness-age-Cor/cache.th40.neg.sig.ocn.annot -viewport 3d`

You should see clusters similar in shape to those pictured in the snapshots below. The color values associated with each cluster are arbitrary and may be different:

Notes:

1. These are all clusters, regardless of significance.
2. When you click on a cluster, the label will tell you the cluster number (eg, cluster-016).

Things to do:

1. Find and click on cluster 1 (the largest cluster). It has a value of -3.69899 since this is log10(.0002). The -3.69899 is because the correlation is negative.
2. Find and click on cluster 18 (on the lateral side of the brain). Its value is -1.70115 because this is log10(0.01990). Note that if you turn off the annotation, the cluster 17 is not visible because its significance is worse than the threshold we set (-fthresh 2, p < .01).

3. All vertices within a cluster are the same value (the p-value of the cluster).
4. You can change the cluster-wise threshold by first clicking on "Show outline only" underneath the Annotation drop down menu. Then click on Configure (underneath "Overlay"), and set the Min value to your desired level. Alternatively, you can drag the red flag to adjust the cluster-wise threshold. As you do this, clusters will appear or disappear from the surface. (If your cursor is in the Min text box, the red flag won't move. Click on another text box to be able to move the flag.)

FsTutorial/GroupAnalysisV6.0 (last edited 2019-09-24 10:14:35 by AndrewHoopes)