top | Longitudinal Tutorial

Using Control Points to Fix Intensity Normalization

Notice that the intensity for the area in the bottom corner of the right hemisphere around slice 90 is only around 90 something instead of 110, and the surfaces here do not include all of the gm and wm. Because this problem occurs in both cross-sectionals, the base and subsequently the longitudinals are also affected. In cases like this, it depends on which data you are planning to use, you can choose to edit either the cross, base, or long. Control points work in all three stages.

In this example, we're demonstrating what the effect will be when adding control points at the very beginning of the stream - in the cross-sectionals. Find all the slices that have this problem and add control points carefully on the wm voxels.

Fixing the cross

Here is what we did. Left - OAS2_0121_MR1 (slice 87) and right - OAS2_0121_MR2 (slice 90).
0121_tp1_87_before.jpg 0121_tp2_90_before.jpg

Once you are satisfied with your control points placements, save it, and run the following commands to complete the fixed cross sectional runs:

recon-all -subjid OAS2_0121_MR1 -autorecon2 -autorecon3
recon-all -subjid OAS2_0121_MR2 -autorecon2 -autorecon3

After that is complete (or when the CA normalization step is complete - you can check in the recon-all-status.log), you can start rerunning the base (remember to delete or rename the base if it already existed, e.g. mv OAS2_0121 OAS2_0121_old). Or, if you prefer, you can wait until the recons are complete to check whether you are satisfied with the results before beginning the next step.

To check the fixed version of these two timepoints, run (in different terminals):

tkmedit OAS2_0121_MR1_fixed brainmask.mgz -aux T1.mgz -surfs
tkmedit OAS2_0121_MR2_fixed brainmask.mgz -aux T1.mgz -surfs

Fixing/Rerunning the base

To rerun the base, run this command:

recon-all -base OAS2_0121 -tp OAS2_0121_MR1 -tp OAS2_0121_MR2 -all

Once you are done with the base, check to see whether the surfaces are now including all white matter.

tkmedit OAS2_0121_intermediate brainmask.mgz -aux T1.mgz -surfs

Notice that although the surfaces improved, it is not perfect. In this case, you can add more control points to the base and rerun with the command below (you can only run the base without the _intermediate suffix so if you have no reason to rename it, there is no need to):

recon-all -base OAS2_0121 -autorecon2 -autorecon3

Now the base is much better. Compare these images at slice 109 (we removed the pial surface in order to have a better view). These are taken from OAS2_0121_intermediate (the mid point) and OAS2_0121_fixed (final results). You can open these using tkmedit, and also the original base (OAS2_0121) if you want. You will not see the control points as shown on the intermediate base since this file is only the output and no interventions had taken place.
0121_109_int.jpg 0121_109_after.jpg

Rerunning the long

The last step is to rerun the longitudinals (also remove/rename existing longitudinal directories first):

recon-all -long OAS2_0121_MR1 OAS2_0121 -all
recon-all -long OAS2_0121_MR2 OAS2_0121 -all


Look at the output in tkmedit. We also reran the long using the intermediate base to see what it would look like. You can open all three and compare using the following commands (you can do it for both MR1 and MR2):

tkmedit OAS2_0121_MR1.long.OAS2_0121 brainmask.mgz -aux T1.mgz -surfs
tkmedit OAS2_0121_MR1.long.OAS2_0121_intermediate brainmask.mgz -aux T1.mgz -surfs
tkmedit OAS2_0121_MR1.long.OAS2_0121_fixed brainmask.mgz -aux T1.mgz -surfs

For the longitudinals, control points were automatically copied over from the cross-sectionals, and the surfaces were initialized from the base, therefore making a great improvement on the surfaces at this end of the stream.

The before (left) and after (right) images from OAS2_0121_MR1.long.OAS2_0121 at slice 107.
0121_long1_107_before.jpg 0121_long1_107_after.jpg

The before (left) and after (right) images from OAS2_0121_MR2.long.OAS2_0121 at slice 106.
0121_long2_106_before.jpg 0121_long2_106_after.jpg

FsTutorial/LongControlPoints (last edited 2011-05-26 18:48:43 by KhoaNguyen)