|Deletions are marked like this.||Additions are marked like this.|
|Line 94:||Line 94:|
|* New dedicated longitudinal pipeline for subfield segmentation - See LongitudinalHippocampalSubfields|
FreeSurfer Release Notes
These Release Notes cover what's new in a release, and known issues. See previous release notes for older versions.
2 March 2013
Stable release version 5.3.0 is a bug fix release to correct the problem with pial and white surface creation affecting thickness and area measures.
- New features:
- 64bit version of freeview (MacOSX Lion). Note: upon opening freeview for the first time, it may display a message prompting to Allow or Deny network connections. This originates from a Qt library which manages File Open functionality. You may select Deny without affecting the functionality of freeview, except perhaps in regards to some network drive accessibility.
- freeview contains features intended to transition to replacing tkmedit and tksurfer. Also slice scrolling speed is improved.
- added -first_wm_peak flag to mris_make_surfaces, which may aid accurate more white matter surfaces especially in heavily myelinated areas like visual cortex on data that is higher res than 1mm. enable the flag via an expert.opts file.
- Bug fixes:
- fix for mris_make_surfaces to correct pial/white surface bug.
- fix for mri_mask problem affecting edits.
- fix for qdec problem affecting threshold entry box.
- fix for Fedora 18, Ubuntu 13, and Gentoo 64 glibc crashes (seg-faults on any binary).
- fix for recon-all tal-check failure-threshold sensitivity.
Opensuse platforms versions greater than 12.1 are not compatible with the FreeSurfer licensing scheme. There are two potential solutions. The first is to copy /lib64/libcrypt-2.14.1.so from an Opensuse 12.1 installation to $FREESURFER_HOME/lib. Then make a symbolic link to it in that directory (ln -s libcrypt-2.14.1.so libcrypt.so.1). Or 2) just download and install the Development Version of FreeSurfer.
The Talairach transform step will fail at the mri_nu_correct.mni command on newer Linux distributions that come with perl version 5.22 (and higher) due to an incompatibility with the mni tools shipped with FreeSurfer and newer versions of perl. The issue has been fixed in the Development Version of FreeSurfer.
freeview & Ubuntu: When you run freeview, you get the error "freeview.bin: error while loading shared libraries: libjpeg.so.62: cannot open shared object file: No suchfile or directory." Freeview will work fine if you install libjpeg62-dev and run:
sudo apt-get install libjpeg62-dev
freeview: on the Fedora 18 platform, when loading a surface overlaid on a volume, the surface might be misaligned. The message "Warning: MatrixInverse failed." may also be displayed in the terminal. A fix or workaround is not yet available.
fsfast: on the Mac, preproc-sess might fail looking for 3dvolreg.afni. 3dvolreg.afni is just a redistributed copy of AFNIs 3dvolreg, so the workaround is to install AFNI on your own, then: sudo cp 3dvolreg /Applications/freesurfer/bin/3dvolreg.afni Or you can download 3dvolreg.afni from here. (ERROR: cannot find AFNI command 3dvolreg.afni)
- The -dti option in freeview will not display eigenvectors correctly if the orientation of the volumes is anything other than RAS. This will be fixed for the next release.
- Creation of the aseg.stats table fails when only running -autorecon1 or -autorecon2 because ribbon.mgz is not present. This has been fixed. Ask for a patch.
- mris_preproc --qdec and --qdec-long only works with unix input text files (\n newline). If you have difficulties (i.e. old mac \r or windows \r\n newline files) ask for a fixed version.
flirt.fsl and other fsl binaries will be missing from the MacOS snow leopard build. Download the the binaries from here. Extract the contents of the tar file into the $FREESURFER_HOME/bin directory. This should result in 6 new files with a .fsl extension in the $FREESURFER_HOME/bin directory.
recon-all/mri_segstats: when the flags -autorecon1 -autorecon2 are used with recon-all, then recon-all error exists with message about missing ribbon.mgz file. there are two workarounds: 1. include the flag -autorecon3 (or just use -all, which is the recommendation), or 2. get mri_segstats from here, then:cp mri_segstats $FREESURFER_HOME/bin
LGI: issue when using Matlab 2013. the fix is to edit the file $FREESURFER_HOME/matlab/SearchProjectionOnPial.m and make these changes:
find this line: < for t=1:step:size(perim,2) and change to: > si=max(size(perim)); > for t=1:step:si
- fslregister (and so bbregister with --init-fsl) requires that FSL be installed. This has been fixed. The fix will be in the next version. Ask for a patch if you need it before then.
Unpacking DICOM files from the Siemens Skyra scanner fails on MacOS. This has been fixed. Download the new version of mri_convert and copy it to $FREESURFER_HOME/bin/mri_convert
- Longitudinal pipeline, adding time points: there is a bug in recon-all that prevents adding time points to an existing base (usually you should not do this anyway), make these changes to fix it:
in recon-all line 6148 change: if ( ! $found_tpNid ) then to if ( ! $found_tpNid && ! $DoAddTp ) then
- selxavg3-sess can use a huge amount of memory when running mni305. This is mostly due to poor memory management in matlab. For the next release, selxavg3-sess has been modified to reduce the amount of memory used by a factor of 2 or more.
mni152reg exits with a "Permission denied" error. Use ftp://surfer.nmr.mgh.harvard.edu/pub/dist/freesurfer/5.3.0-patch/mni152reg instead. Copy it into $FREESURFER_HOME/bin
recon-all: two issues with using T2 to refine the pial: (1) statistics were computed before the pial surface was refined, and (2) no way to recover from registration errors. This version: ftp://surfer.nmr.mgh.harvard.edu/pub/dist/freesurfer/5.3.0-patch/recon-all fixes these problems. Copy it into $FREESURFER_HOME/bin. If the registration fails, then try using -bbr-init-header.
Poorly aligned data that can not be fixed by the primary talairach alignment utility will result in a "Can't locate shellwords.pl in @INC error on system running perl5.16 or greater. One possible solution is to use a version of perl pre-v5.16, if one is installed on your system. This is done by modifying the 1st line of file $FREESURFER_HOME/mni/bin/mritotal. For example:
< #!/usr/bin/perl > #!/usr/bin/perl5.12
Another workaround is to use tkregister to manually align the image, such that mritotal is not run, and the rest of recon-all should run properly.
- Entorhinal and perirhinal labels are incorrect due to a spherical warp that is too rigid. This results in the labels being shifted too medial, so that the pc is often where ec should be. This problem has been fixed for the next release (v6).
When using the VirtualBox version of freesurfer (freesurfer-Virtualbox-linux-x86-stable-pub-v5.3-full), the "mri_nu_correct.mni" command will fail when executed in the VirtualBox environment on a subject whose data exists on a shared folder between the host and the virtual machine. Currently, the only known solution is to import the subject data folder into the VirtualBox environment, and then run recon-all.
Upcoming Features (v6.0)
- Brain networks (cognitive components) estimated from 10449 Experiments and 83 tasks in the Brainmap database are released in MNI152 and fsaverage space:
- There are three sets of data (networks+auxiliary information) that are released: (1) Probability that a task would recruit a component (csv files), (2) Probability that a component would activate a voxel/vertex, (3) quantitative measures of functional specificity and flexibility (i.e., whether a voxel/vertex specializes for a specific cognitive component or supports multiple components).
- The volumetric maps + csv files are found in average/Yeo_Brainmap_MNI152/. See Yeo_Brainmap_MNI152_README in directory for more details.
- The surface maps are found in the subjects/fsaverage/label directory. See Yeo_Brainmap_fsaverage_README in directory for more details.
New hippocampal subfields generation - See HippocampalSubfields
New brainstem substructures generation - See BrainstemSubstructures
New dedicated longitudinal pipeline for subfield segmentation - See LongitudinalHippocampalSubfields
recon-all now produces aseg.mgz (subcortical atlas) with Hi-Res data (<1mm). the -hires flag is still necessary to include with recon-all when hi-res data is input. changes to mri_normalize, mri_em_register and mri_watershed were made to support this feature.
- Adding the 'fs_update' script which allows users to update binaries or other elements of the freesurfer installation.
Adding the 'fs_tutorial_data' script which provides a means for downloading the data for completing the Tutorials.
- Fix to the implementation of F-test for linear mixed effects model.
- bbregister now uses the FS mri_coreg program by to initialize BBR. FSL or SPM/matlab are no longer needed. mri_coreg is based on spm_coreg and gives very similar results as to when spmregister is run.
- mri_fdr -- command line program to compute and apply the false discovery rate algorithm